Migrate your RedEarth Monitoring to Deye Cloud

SECTION 1: RedEarth Battery Systems: Setting Up Your Deye Cloud Account

If you already have the Deye Cloud app installed & set up, you can skip to the next section.

To see your system in the Deye Cloud app, you’ll need your own Deye Cloud account. Setting one up only takes a few minutes. Once you have it, we can link it for you if you’re already on the Proven Energy system.

1.1 Download the app

Download the Deye Cloud app from the App Store or Google Play.

Migrate your RedEarth Monitoring to Deye Cloud 1
Migrate your RedEarth Monitoring to Deye Cloud 2
Migrate your RedEarth Monitoring to Deye Cloud 3
Migrate your RedEarth Monitoring to Deye Cloud 4
Migrate your RedEarth Monitoring to Deye Cloud 5

2. Sign Up

Open the app and sign up with your email address and a password. You account should automatically be seat to the EMEA, APAC region.

3. Stop There

Don’t create a plant or add any devices.

Your system is already set up in Deye Cloud. We’ll add it to your account for you.

4. Send us your email address

Contact Proven Energy and tell us the email address you signed up with. We’ll link your system to your account and let you know when it’s done.
Your system will automatically appear in your app.

 

Migrate your RedEarth Monitoring to Deye Cloud 6

SECTION 2: Updating Your Wi-Fi Connection

Following the shutdown of RedEarth Energy Storage, you may need to update your internet connection to keep your system monitoring working through Deye Cloud.

If you have home Wi-Fi, follow the steps below to connect your Deye inverter to your existing network. No home Wi-Fi? See other connection options at the bottom of the page.

Before you start

You’ll need:

  • A smartphone or tablet with the Deye Cloud app installed, and a Deye account.
  • Bluetooth turned on
  • Your home Wi-Fi name and password
  • A 2.4 GHz Wi-Fi network with strong signal strength. Check the Wi-Fi bars on your phone next to the inverter. Fewer than 3 bars can cause dropouts. In this situation, we recommend installing a Wi-Fi booster.

Finding your data logger

On some systems the data logger is attached to the underside of the inverter. On Bush Chook and Gecko V2 systems, the Deye inverter is inside the battery cabinet.

It’s a small black device with a QR code, a serial number and two blue lights marked NET and COM. You’ll need this serial number in Step 3.

Migrate your RedEarth Monitoring to Deye Cloud 7
Migrate your RedEarth Monitoring to Deye Cloud 8

Stay safe

Only look at the logger if you can reach it safely. Don’t remove any electrical covers, touch any wiring or interfere with any electrical parts unless directed by a qualified electrician.

Connecting to your home Wi-Fi

 

1. Open Deye Cloud

Open the Deye Cloud app on your phone.

2. Open Wi-Fi Configuration

Tap the menu icon (three lines) in the top-right corner.

Select Wi-Fi Configuration.

 

Migrate your RedEarth Monitoring to Deye Cloud 9

3. Find your data logger

Wait while the app scans for nearby devices.

Select the device with the same serial number as the label on your data logger.

Migrate your RedEarth Monitoring to Deye Cloud 10

4. Connect to your home Wi-Fi

Follow the prompts in the app. Select your home Wi-Fi network and enter its password.

5. Wait while it connects

Keep your phone close to the data logger while it sets up.

This can take 1 to 5 minutes. Stay on this screen until it’s finished.

 

Migrate your RedEarth Monitoring to Deye Cloud 11

6. Choose your data centre

If the app asks you to choose a data centre, select EMEA, APAC. This is the region that covers Australia.

Then tap Next.

 

Migrate your RedEarth Monitoring to Deye Cloud 12

7. Finish setup

When you see WiFi configured successfully, enter a device name you’ll recognise, such as “Home inverter” or “123 Main Street Inverter”.

Tap Complete.

Your system can take a few minutes to appear in the app. If it doesn’t show up, pull down on the screen to refresh.

Migrate your RedEarth Monitoring to Deye Cloud 13

Check your connection

On the data logger

The blue NET light should be on. This means the logger is connected to your network.

The blue COM light shows the logger is communicating with your inverter.

 

Migrate your RedEarth Monitoring to Deye Cloud 14

On the inverter

The green Normal light should stay on, before and after you change your Wi-Fi.

It shows your inverter is working, whether or not it’s connected to the internet.

 

Migrate your RedEarth Monitoring to Deye Cloud 15

Don’t have home Wi-Fi?

Your inverter will need its own mobile internet connection to keep monitoring working through Deye Cloud. Proven Energy can organise:

  • A compatible 4G router
  • A SIM card with a mobile data plan
  • Installation and setup

The SIM card goes into the new 4G router, not your existing Deye Wi-Fi logger. Contact us to arrange this. Charges may apply for equipment, installation and ongoing data.

Need help?

If you’re having trouble connecting your system, or the blue NET light isn’t coming on, contact Proven Energy.

www.provenenergy.com.au | 07 4642 0017

Migrate your RedEarth Monitoring to Deye Cloud 16